Crocheting in 2012

Share via emailShare on TwitterShare on TumblrSubmit to StumbleUponSave on DeliciousDigg ThisSubmit to redditShare on Myspace

My first WIP (work in progress) to welcome the New Year 2012 is an experimental bolero design based on Dora Ohrenstein’s “Glitter Girl Bolero.” Dora’s bolero comes from the book “100 Crochet Projects” which I bought from National Book Store several years ago for PhP550 (more or less 10euros).

Bolero WIP

The bolero, a work in progress.

I selected this bolero as “base” for my motif experiment because it is a simple but elegant construction and looks easy to modify. There is also ample trim space around the sleeves and around the neckline and edges of the bolero where I may do my work of incorporating Irish crochet motifs.

This deep purple color of cotton thread in size 8 is not my color choice but it is available in my (dwindling) stash, just about enough to complete a base bolero with short sleeves. I have less than 3 balls (total of 150 grams) of this thread.

To work with cotton thread 8 for my size (32-34) using the pattern, I use a hook 3mm (for lower half) and a larger hook, 3.5mm (for upper half). I use different hook sizes because I want the lower section of the bolero to be smaller and closer to the body to make a nice shape, and the upper section to be a bit loose.

I don’t sew the shoulder seams until I am sure of the fit: I tie the seams with yarn and wear the bolero. I see that the armholes will be a little bit tight, so I add 2 extra rows at the shoulders.

For the sleeves, I used 6-ch meshes, a total of 18 loops all around the armhole. The loops are joined to the armhole with sc in every space, rather than in the stitches. By round 5 I switched to the smaller hook. I also thought that 6 rounds was enough and let the rest be made up of joined motifs.

Working on this tonight, I have thought of two directions for crochet this coming new year: first is modifying existing garment patterns that call for DK, worsted, aran or sport weight yarn into designs that use thread of size 8. I find it rather exciting trying to figure out sizing for cotton thread and I think this helps me understand gauge and garment contruction a bit better.

Second is to use a base garment mesh for experimenting with joined motifs for garments. I think that this might be a reasonable alternative to the lack of a tailor’s dummy which I will definitely need should I decide to go seriously into constructing crocheted garments from motifs ala Irish crochet or Ukrainian crochet as those seen in Duplet magazines.

I also have another batch of WIPs – these crochet finger puppets for my nephew. I have made them in two strands of cotton 8 thread, and so they are rather small and making up the eyes, noses, ears, etc is quite fiddly and detailed.

Crocheted finger puppets

Crocheted finger puppets

I wondered if I should’ve made them bigger as my sister suggested – larger faces, that is – but for now I have opted for smaller but more detailed. They are quite cute and fun to play with, but making them isn’t easy with so may small parts!

Well what the heck – this is good distraction from the bolero!

And yet another good distraction is New Year dinner  – learning to cook chicken and shrimp congee.

Happy New Year, fellow crocheters!

Derivatives #5

Share via emailShare on TwitterShare on TumblrSubmit to StumbleUponSave on DeliciousDigg ThisSubmit to redditShare on Myspace

Derivatives #5
Based on Natural Tendencies #5
Beaded Necklace and Bracelet in Crochet Lace
PROMO: Buy this pattern and get “Natural Tendencies #5″ for FREE!

This pattern is suitable for workers skilled in thread crochet and crocheting with beads. The lace is lightly starched to stiffen and protect the material. Use mercerized cotton thread in size 8 or 10, and a steel crochet hook at least 1.3mm.

Derivatives #5
Beaded Bracelet and Necklace in Crochet Lace
CROCHET PATTERN as PDF for sale

USD 2.00 / Download

SKILL LEVEL
Intermediate

FINISHED MEASUREMENTS
Necklace: approximately 1.00 inch wide and 16.5 inches long
Bracelet: approximately 1.25 inches wide and 7.5 inches long
Length can be adjusted for woman’s sizes (table of sizes included in last page)

YARN
Canon Mercerized Cotton Thread size 8, color brown (for necklace) and cream (for bracelet)
OR any crochet cotton thread size 10 or size 8, color brown and cream

CROCHET HOOK
Size 3 Steel Crochet Hook (1.3mm) or size required for gauge

GAUGE
30 sc = 4 inches

TERMINOLOGY
Pattern is written using US crochet terminology (see chart on last page for conversion)

NOTIONS
Bead-threading needle
Button (8mm) for necklace enclosure
NECKLACE: Pearl beads – 7pcs (2mm), 14 pcs (3mm), 7 pcs (5mm) – total of 28 pearl beads
BRACELET: Pearl beads – 12pcs (2mm), 12 pcs (3mm), 12 pcs (5mm) – total of 36 pearl beads; and Transparent glass beads – 24 pcs (4mm)
Derivatives #5
DESIGN NOTES

The beads in the necklace are threaded in the order of (7 3mm beads, 7 5mm beads, 7 3mm beads, 7 2mm beads) to create a design wherein the larger beads are at the middle and the smaller ones near the ends of the necklace. Experiment with random arrangements of different sized beads too. Beads are used in the necklace in alternating rows. The necklace is worked in 57 rows. Work with an even number of rows + 1 row, with one pearl bead for every 2 rows.

The bracelet is worked in 25 rows making a bracelet of 8 inches in length. You might wish to work with shorter lengths with 7 inches as standard women’s size. To do so, just work with an even number of rows + 1 row, with 2 glass beads and 3 pearl beads (one of each in 3 different sizes) for every 2 rows. Thread all the pearl beads first followed by the glass beads.

The ends of the bracelet are sewn together after crocheting. Alternatively, you can use clasps or use beads or buttons and a crocheted loop as closures for the bracelet.

Derivatives #5

Transformations #3

Share via emailShare on TwitterShare on TumblrSubmit to StumbleUponSave on DeliciousDigg ThisSubmit to redditShare on Myspace

Transformations #3
Necklace in Crochet Lace and Beads

Transformations #3Transformations #3
Necklace in Crochet Lace
CROCHET PATTERN as PDF for sale

USD 2.00 / Download

This pattern is suitable for workers skilled in thread crochet and crocheting with beads. The lace is lightly starched to stiffen and protect the material. Use mercerized cotton thread in size 8 or 10, and a steel crochet hook at least 1.3mm.

SKILL LEVEL
Intermediate

FINISHED MEASUREMENTS
Necklace: approximately 1.25 inches wide
The finished necklaces shown are 8.5 inches long (for choker-type ) and 18 inches long (for full necklace at the collar bone) without the ties.

YARN
Canon Mercerized Cotton Thread size 8, color olive
OR any crochet cotton thread size 10 or size 8, color olive

CROCHET HOOK
Size 3 Steel Crochet Hook (1.3mm) or size required for gauge

GAUGE
30 sc = 4 inches

TERMINOLOGY
Pattern is written using US crochet terminology (see chart on last page for conversion)

NOTIONS
Bead-threading needle
2 large beads (approx. 10mm) for ties
Commercial Fabric stiffener (or 1 tsp cornstarch in 1 cup of water with 1 tsp salt or vinegar)
Manila paper or craft paper

FOR SHORTER CHOKER-TYPE NECKLACE:
2 pearl beads (6mm)
16 pearl beads (4mm)

FOR FULL NECKLACE AT THE COLLARBONE LENGTH:
2 pearl beads (6mm)
34 pearl beads (4mm)

Transformations #3

DESIGN NOTES
The necklace is crocheted starting from the narrow end. The beads are strung onto the thread before working. The pattern is suitable for making a necklace of lengths 8 inches (for choker-type as shown in cover photo) to 18 inches (for full necklace at the collarbone as shown in the last page).

SPECIAL STITCHES
Picot: ch 3, sl st in st at base of ch-3 (picot made)

3-Double Crochet Bobble (3-dc-bobble): Holding back on hook the last loop of each dc, work 3 dc in stitch indicated, yo and draw through all loops on hook (cluster made).

Transformation #3

Here is the same pattern worked in natural color cotton thread and transparent glass beads.

Transformations #1

Share via emailShare on TwitterShare on TumblrSubmit to StumbleUponSave on DeliciousDigg ThisSubmit to redditShare on Myspace

Transformations #1
Necklace in Crochet Lace and Beads

Transformations #1Transformations #1
Necklace in Crochet Lace
CROCHET PATTERN as PDF for sale

USD 2.00 / Download

This pattern is suitable for workers skilled in thread crochet and crocheting with beads. The lace is lightly starched to stiffen and protect the material. Use mercerized cotton thread in size 8 or 10, and a steel crochet hook at least 1.3mm.

SKILL LEVEL
Intermediate

FINISHED MEASUREMENTS
Necklace: approximately 1.00 inch wide
Length can be adjusted for woman’s sizes (table of sizes included in last page)
The finished necklace shown is 14 inches long (without the ties)

YARN
Monaco Mercerized Crochet Cotton Thread size 8, color light olive (B258)
OR any crochet cotton thread size 10 or size 8, color light olive

CROCHET HOOK
Size 3 Steel Crochet Hook (1.3mm) or size required for gauge

GAUGE
30 sc = 4 inches

TERMINOLOGY
Pattern is written using US crochet terminology (see chart on last page for conversion)

NOTIONS
Bead-threading needle
2 large beads (approx. 10mm) for ties
23 pearl beads (4mm)
Commercial Fabric stiffener (or 1 tsp cornstarch in 1 cup of water with 1 tsp salt or vinegar)
Manila paper or craft paper

Transformations #1

Detail of the ties of the necklace.

DESIGN NOTES
The necklace is crocheted starting from the narrow end. The necklace pattern is also suitable for making a collar (shorter version of a choker that goes round the middle of the neck) or a bracelet. Experiment with other sizes of beads. It may also be possible to use the same pattern to make a longer necklace, below the neckline or a lariat.

SPECIAL STITCHES
3-Double Crochet Bobble (3-dc-bobble): Holding back on hook the last loop of each dc, work 3 dc in base stitch indicated, yo and draw through all loops on hook (cluster made).

Transformations #1

Here is the same necklace pattern worked in natural color cotton thread and transparent glass beads.

Transformations – lace pattern-making through round motifs

Share via emailShare on TwitterShare on TumblrSubmit to StumbleUponSave on DeliciousDigg ThisSubmit to redditShare on Myspace

Motivated by the construction possibilities of lace-making in “Natural Tendencies”, I sought a new method of pattern-making more complex samples of lace. At present, my basis for construction is a Japanese book of crochet motifs which I bought at the National Book Store in Tagbilaran City.

Begin with a motif.

Begin with a motif. Then the transformation.

The book shows motifs in various shapes – round, triangle, hexagon, octagon as well as a few flower and edging motifs. The challenge I presented myself was that of “Transformation”: how can I transform the traditional motif into a strip of lace?

The transformation in progress.

The transformation in progress.

The motifs are mostly worked in the round. To transform them into strips of laces worked from the narrow end, I had to “unravel” the motifs and re-work them in rows. In this process, I always make symbol drawings to keep track of the design and to explore variations.

Testing variations in the new lace design.

Testing variations in the new lace design.

In most cases, I use the center of the motif as the beginning of the lace. In other cases, I begin the lace with a placket design.

As soon as a viable lace pattern is developed, I proceed to making variations in search for the various construction possibilities within the already established pattern. In the example shown above, I try to vary the size of the outer loops of the lace, increasing as the lace progresses toward the center (if it is to become a necklace). In this example, I also explore methods of curving the lace strip.

It is interesting in the end to compare the original motif and the resulting lace strip design.